Прошел интересный квест по установке Wildfly 10 на Debian 7 с последующим созданием Data Source к базе Oracle 11g. Поехали.
0. Скрипт установки.
- создаем каталог $WILDFLY_HOME/modules/system/layers/base/com/oracle/ojdbc6/main/ (того, что подчеркнуто, в системе не было)
- заливаем в main собственно драйвер ojdbc6.jar и там же создаем файл module.xml следующего содержания:
2. Регистрируем драйвер:
3. Конфигурация датасорса в standalone.xml после выполнения всех операций:
0. Скрипт установки.
#!/bin/bash
WILDFLY_VERSION=10.0.0.Final
WILDFLY_FILENAME=wildfly-$WILDFLY_VERSION
WILDFLY_ARCHIVE_NAME=$WILDFLY_FILENAME.tar.gz
WILDFLY_DOWNLOAD_ADDRESS=http://download.jboss.org/wildfly/$WILDFLY_VERSION/$WILDFLY_ARCHIVE_NAME
INSTALL_DIR=/opt
WILDFLY_FULL_DIR=$INSTALL_DIR/$WILDFLY_FILENAME
WILDFLY_DIR=$INSTALL_DIR/wildfly
WILDFLY_USER="wildfly"
WILDFLY_SERVICE="wildfly"
WILDFLY_MODE="standalone"
WILDFLY_STARTUP_TIMEOUT=240
WILDFLY_SHUTDOWN_TIMEOUT=30
SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
if [[ $EUID -ne 0 ]]; then
echo "This script must be run as root."
exit 1
fi
echo "Downloading: $WILDFLY_DOWNLOAD_ADDRESS..."
[ -e "$WILDFLY_ARCHIVE_NAME" ] && echo 'Wildfly archive already exists.'
if [ ! -e "$WILDFLY_ARCHIVE_NAME" ]; then
wget -q $WILDFLY_DOWNLOAD_ADDRESS
if [ $? -ne 0 ]; then
echo "Not possible to download Wildfly."
exit 1
fi
fi
echo "Cleaning up..."
rm -f "$WILDFLY_DIR"
rm -rf "$WILDFLY_FULL_DIR"
rm -rf "/var/run/$WILDFLY_SERVICE/"
rm -f "/etc/init.d/$WILDFLY_SERVICE"
echo "Installation..."
mkdir $WILDFLY_FULL_DIR
tar -xzf $WILDFLY_ARCHIVE_NAME -C $INSTALL_DIR
ln -s $WILDFLY_FULL_DIR/ $WILDFLY_DIR
useradd -s /sbin/nologin $WILDFLY_USER
chown -R $WILDFLY_USER:$WILDFLY_USER $WILDFLY_DIR
chown -R $WILDFLY_USER:$WILDFLY_USER $WILDFLY_DIR/
#mkdir -p /var/log/$WILDFLY_SERVICE
echo "Registrating Wildfly as service..."
# if should use systemd
if [ -x /bin/systemctl ]; then
# Script from $WILDFLY_DIR/docs/contrib/scripts/systemd/launch.sh didn't work for me
cat > $WILDFLY_DIR/bin/launch.sh << "EOF"
#!/bin/sh
if [ "x$WILDFLY_HOME" = "x" ]; then
WILDFLY_HOME="/opt/wildfly"
fi
if [ "x$1" = "xdomain" ]; then
echo 'Starting Wildfly in domain mode.'
$WILDFLY_HOME/bin/domain.sh -c $2 -b $3
#>> /var/log/$WILDFLY_SERVICE/server-`date +%Y-%m-%d`.log
else
echo 'Starting Wildfly in standalone mode.'
$WILDFLY_HOME/bin/standalone.sh -c $2 -b $3
#>> /var/log/$WILDFLY_SERVICE/server-`date +%Y-%m-%d`.log
fi
EOF
# $WILDFLY_HOME is not visible here
sed -i -e 's,WILDFLY_HOME=.*,WILDFLY_HOME='$WILDFLY_DIR',g' $WILDFLY_DIR/bin/launch.sh
#sed -i -e 's,$WILDFLY_SERVICE,'$WILDFLY_SERVICE',g' $WILDFLY_DIR/bin/launch.sh
chmod +x $WILDFLY_DIR/bin/launch.sh
cp $WILDFLY_DIR/docs/contrib/scripts/systemd/wildfly.service /etc/systemd/system/$WILDFLY_SERVICE.service
WILDFLY_SERVICE_CONF=/etc/default/$WILDFLY_SERVICE
# To install multiple instances of Wildfly replace all hardcoding in systemd file
sed -i -e 's,EnvironmentFile=.*,EnvironmentFile='$WILDFLY_SERVICE_CONF',g' /etc/systemd/system/$WILDFLY_SERVICE.service
sed -i -e 's,User=.*,User='$WILDFLY_USER',g' /etc/systemd/system/$WILDFLY_SERVICE.service
sed -i -e 's,PIDFile=.*,PIDFile=/var/run/wildfly/'$WILDFLY_SERVICE'.pid,g' /etc/systemd/system/$WILDFLY_SERVICE.service
sed -i -e 's,ExecStart=.*,ExecStart='$WILDFLY_DIR'/bin/launch.sh $WILDFLY_MODE $WILDFLY_CONFIG $WILDFLY_BIND,g' /etc/systemd/system/$WILDFLY_SERVICE.service
systemctl daemon-reload
#systemctl enable $WILDFLY_SERVICE.service
fi
# if non-systemd Debian-like distribution
if [ ! -x /bin/systemctl -a -r /lib/lsb/init-functions ]; then
cp $WILDFLY_DIR/docs/contrib/scripts/init.d/wildfly-init-debian.sh /etc/init.d/$WILDFLY_SERVICE
sed -i -e 's,NAME=wildfly,NAME='$WILDFLY_SERVICE',g' /etc/init.d/$WILDFLY_SERVICE
WILDFLY_SERVICE_CONF=/etc/default/$WILDFLY_SERVICE
fi
# if non-systemd RHEL-like distribution
if [ ! -x /bin/systemctl -a -r /etc/init.d/functions ]; then
cp $WILDFLY_DIR/docs/contrib/scripts/init.d/wildfly-init-redhat.sh /etc/init.d/$WILDFLY_SERVICE
WILDFLY_SERVICE_CONF=/etc/default/wildfly.conf
chmod 755 /etc/init.d/$WILDFLY_SERVICE
fi
# if neither Debian nor RHEL like distribution
if [ ! -x /bin/systemctl -a ! -r /lib/lsb/init-functions -a ! -r /etc/init.d/functions ]; then
cat > /etc/init.d/$WILDFLY_SERVICE << "EOF"
#!/bin/sh
### BEGIN INIT INFO
# Provides: ${WILDFLY_SERVICE}
# Required-Start: $local_fs $remote_fs $network $syslog
# Required-Stop: $local_fs $remote_fs $network $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start/Stop ${WILDFLY_FILENAME}
### END INIT INFO
WILDFLY_USER=${WILDFLY_USER}
WILDFLY_DIR=${WILDFLY_DIR}
case "$1" in
start)
echo "Starting ${WILDFLY_FILENAME}..."
start-stop-daemon --start --background --chuid $WILDFLY_USER --exec $WILDFLY_DIR/bin/standalone.sh
exit $?
;;
stop)
echo "Stopping ${WILDFLY_FILENAME}..."
start-stop-daemon --start --quiet --background --chuid $WILDFLY_USER --exec $WILDFLY_DIR/bin/jboss-cli.sh -- --connect command=:shutdown
exit $?
;;
log)
echo "Showing server.log..."
tail -500f $WILDFLY_DIR/standalone/log/server.log
;;
*)
echo "Usage: /etc/init.d/wildfly {start|stop}"
exit 1
;;
esac
exit 0
EOF
sed -i -e 's,${WILDFLY_USER},'$WILDFLY_USER',g; s,${WILDFLY_FILENAME},'$WILDFLY_FILENAME',g; s,${WILDFLY_SERVICE},'$WILDFLY_SERVICE',g; s,${WILDFLY_DIR},'$WILDFLY_DIR',g' /etc/init.d/$WILDFLY_SERVICE
chmod 755 /etc/init.d/$WILDFLY_SERVICE
fi
if [ ! -z "$WILDFLY_SERVICE_CONF" ]; then
echo "Configuring service..."
echo JBOSS_HOME=\"$WILDFLY_DIR\" > $WILDFLY_SERVICE_CONF
echo JBOSS_USER=$WILDFLY_USER >> $WILDFLY_SERVICE_CONF
echo WILDFLY_HOME=\"$WILDFLY_DIR\" > $WILDFLY_SERVICE_CONF
echo WILDFLY_USER=\"$WILDFLY_USER\" > $WILDFLY_SERVICE_CONF
echo STARTUP_WAIT=$WILDFLY_STARTUP_TIMEOUT >> $WILDFLY_SERVICE_CONF
echo SHUTDOWN_WAIT=$WILDFLY_SHUTDOWN_TIMEOUT >> $WILDFLY_SERVICE_CONF
echo WILDFLY_CONFIG=$WILDFLY_MODE.xml >> $WILDFLY_SERVICE_CONF
echo WILDFLY_MODE=$WILDFLY_MODE >> $WILDFLY_SERVICE_CONF
echo WILDFLY_BIND=0.0.0.0 >> $WILDFLY_SERVICE_CONF
fi
echo "Configuring application server..."
sed -i -e 's,<deployment-scanner path="deployments" relative-to="jboss.server.base.dir" scan-interval="5000",<deployment-scanner path="deployments" relative-to="jboss.server.base.dir" scan-interval="5000" deployment-timeout="'$WILDFLY_STARTUP_TIMEOUT'",g' $WILDFLY_DIR/$WILDFLY_MODE/configuration/$WILDFLY_MODE.xml
sed -i -e 's,<inet-address value="${jboss.bind.address:127.0.0.1}"/>,<any-address/>,g' $WILDFLY_DIR/$WILDFLY_MODE/configuration/$WILDFLY_MODE.xml
sed -i -e 's,<socket-binding name="ajp" port="${jboss.ajp.port:8009}"/>,<socket-binding name="ajp" port="${jboss.ajp.port:28009}"/>,g' $WILDFLY_DIR/$WILDFLY_MODE/configuration/$WILDFLY_MODE.xml
sed -i -e 's,<socket-binding name="http" port="${jboss.http.port:8080}"/>,<socket-binding name="http" port="${jboss.http.port:28080}"/>,g' $WILDFLY_DIR/$WILDFLY_MODE/configuration/$WILDFLY_MODE.xml
sed -i -e 's,<socket-binding name="https" port="${jboss.https.port:8443}"/>,<socket-binding name="https" port="${jboss.https.port:28443}"/>,g' $WILDFLY_DIR/$WILDFLY_MODE/configuration/$WILDFLY_MODE.xml
sed -i -e 's,<socket-binding name="osgi-http" interface="management" port="8090"/>,<socket-binding name="osgi-http" interface="management" port="28090"/>,g' $WILDFLY_DIR/$WILDFLY_MODE/configuration/$WILDFLY_MODE.xml
[ -x /bin/systemctl ] && systemctl start $WILDFLY_SERVICE || service $WILDFLY_SERVICE start
echo "Done."
1. По умолчанию в контейнере нет драйвера JDBC и его надо поставить. Насколько я понимаю, для того, чтобы classloader смог загрузить его, он должен быть объявлен как модуль. По сути, процесс сводится к созданию кастом-модуля и регистрации оного в системе:- создаем каталог $WILDFLY_HOME/modules/system/layers/base/com/oracle/ojdbc6/main/ (того, что подчеркнуто, в системе не было)
- заливаем в main собственно драйвер ojdbc6.jar и там же создаем файл module.xml следующего содержания:
<?xml version="1.0" encoding="UTF-8"?> <module xmlns="urn:jboss:module:1.0" name="com.oracle.ojdbc6"> <resources> <resource-root path="ojdbc6.jar"/> </resources> <dependencies> <module name="javax.api"/> <module name="javax.resource.api"/> <module name="javax.transaction.api"/> </dependencies> </module>
2. Регистрируем драйвер:
root@debian:/opt/wildfly-10.0.0.Final/bin# sh jboss-cli.sh
You are disconnected at the moment. Type 'connect' to connect to the server or 'help' for the list of supported commands.
[disconnected /] connect
[standalone@localhost:9990 /] /subsystem=datasources/jdbc-driver=oracle:add(driver-name=oracle,driver-module-name=com.oracle.ojdbc6,driver-class-name=oracle.jdbc.driver.OracleDriver)
{"outcome" => "success"}
[standalone@localhost:9990 /] exit
root@debian:/opt/wildfly-10.0.0.Final/bin#
3. Конфигурация датасорса в standalone.xml после выполнения всех операций:
<datasource jta="true" jndi-name="java:/OracleDS" pool-name="OracleDS" enabled="true" use-ccm="true"> <connection-url>jdbc:oracle:thin:@####:1521:DEV</connection-url> <driver>oracle</driver> <security> <user-name>admin</user-name> <password>admin</password> </security> <validation> <valid-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleValidConnectionChecker"/> <background-validation>true</background-validation> <stale-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleStaleConnectionChecker"/> <exception-sorter class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleExceptionSorter"/> </validation> </datasource>4. После перезагрузки на попытку деплоя любого приожения последует ругань DefaultDataSource is missing [jboss.naming.context.java.jboss.datasources.ExampleDS]. Решается удалением тестового датасорса через терминал JBoss:
# /subsystem=datasources/data-source=ExampleDS:remove() # /subsystem=ee/service=default-bindings:write-attribute(name=datasource,value=undefined)5. Может пригодится предустановленная заглушка security-domain:
<?xml version="1.0" encoding="UTF-8"?> <jboss-web> <context-root>CrudJSF</context-root> <security-domain>jaspitest</security-domain> </jboss-web>